mig/mag welding · max metal

MIG/MAG welding for demanding operating conditions

Reliable MIG/MAG welding of steel and Hardox® steel: hardfacing with wear-resistant wires, repair of worn attachments and fabrication of new steel structures. In our own workshop in Osijek, Croatia, since 2012.

Experience since 2012

Proven welding procedures that produce strong, durable, high-quality joints

Hardox® specialist

Certified Wearparts Center: we know how to weld abrasion-resistant steels

Special wires

Hardfacing wires designed for heavy loads and abrasive operating conditions

All under one roof

Welding + laser cutting + CNC machining + repair: from material to finished part

from the workshop

Buckets welded in our workshop

Welding a riddle bucket for an excavator in the Max Metal workshop
riddle bucket
Welded joints of a riddle bucket, detail
welded joints
Welded excavator bucket with ESCO teeth before painting
bucket before painting
Wide bucket with ESCO teeth after welding
ready for painting

We MIG/MAG weld grids, side plates and tooth adapters in Osijek. We work the same way on repairs and on new fabrications to drawing.

riddle buckets →
about the service

MIG/MAG welding for repairs and new structures

MIG/MAG welding is a gas-shielded arc welding process that uses a consumable wire electrode. It is now the most widely used technique in industrial and workshop steel welding, combining speed, joint strength and a controlled process.

We specialise in MIG/MAG welding using special wire designed for heavy loads and abrasive operating conditions. Our experience in repairing attachments and manufacturing new ones since 2012 has allowed us to develop reliable procedures that deliver strong, durable, high-quality joints.

We weld ordinary structural steel and Hardox® abrasion-resistant steel. As a certified Hardox® Wearparts Center we work to SSAB guidelines, with the right choice of filler metal and welding parameters.

MIG/MAG welding in the Max Metal workshop in Osijek
why max metal

What you get with us

Stable, strong weld

We pay particular attention to even penetration and to the joint's resistance to mechanical and dynamic loads.

Proven procedures

Years of repair work have taught us how to choose the wire, shielding gas and parameters for every application.

Hardox® certification

Official Hardox® Wearparts Center: we work with hardfacing wires to SSAB standards.

All services in one workshop

Welding + cutting + CNC machining + repair, with no outside subcontractors and no coordination delays.

what we do

Three main applications of MIG/MAG welding

Our welding services cover the entire life cycle of an attachment: from fabricating a new structure, through reinforcing critical zones, to a complete repair after long service.

Repair of worn parts

Crack repair, build-up of worn surfaces, restoring the original geometry of a bucket or other working part. Often an alternative to buying a completely new part.

  • Welding of cracks and fractures
  • Restoring original dimensions after wear
  • Replacing worn cutting edges with new Hardox®
  • A repaired bucket lasts like a new one

Fabrication of new structures

Assembling new attachments from prepared parts: excavator buckets, concrete mixers, mulcher and grab parts, steel structures to design.

  • To customer drawing or our own designs
  • One-off pieces and series
  • Combined with laser cutting and CNC machining
  • Guaranteed joint strength
technical background

MIG and MAG: what is the difference?

MIG and MAG are almost identical welding processes. The only difference is the shielding gas, and therefore which materials they suit. We primarily use the MAG process for steel and Hardox® steel.

MAG

MAG — Metal Active Gas

Shielding gas: active, usually CO₂ or an argon/CO₂ mix (80/20).

Main application: unalloyed and low-alloy structural steels, thick sections, heavy-duty structures.

What the customer gets: an economical process for steel parts and attachments, good penetration into thicker material, ideal for repair welding and hardfacing.

MIG

MIG — Metal Inert Gas

Shielding gas: inert (neutral), argon or helium.

Main application: non-ferrous metals such as aluminium and copper, materials that react with oxygen.

What the customer gets: a clean weld without oxidation, but for our core applications (steel + Hardox®) the MAG process is the technically and economically better choice.

In everyday use both processes are often referred to together as "MIG/MAG welding", because they share the same equipment and working principle. The only difference is the gas and the application.

specialisation

Welding Hardox® steel: done right, to SSAB guidelines

Hardox® steel needs a specific welding approach: controlled heat input, correct preheating, the right filler metal and gradual cooling. Incorrect welding destroys the material's structure and shortens its service life.

As an official Hardox® Wearparts Certified Center we work to the original SSAB guidelines. We have access to the technical documentation, use qualified procedures for wear-resistant steels, and guarantee the strength and durability of welded joints on Hardox® parts.

learn more about Hardox® services
Hardox Wearparts Certified Center logo, the official SSAB certification of Max Metal d.o.o.
how to order

From enquiry to delivery in 4 steps

The process is simple, whether you have a worn attachment to repair, a design for a new structure, or just need a critical zone reinforced.

01

Enquiry and inspection

Send us photos of the worn attachment, a drawing of the new structure or simply a description of the job. Bring the attachment to our workshop or we can arrange an on-site visit.

02

Assessment and quote

We assess the scope of work, choose the process (hardfacing / repair / new fabrication) and send you a precise quote with a lead time.

03

Welding

We prepare the surface, select the right wire and parameters, and carry out the welding. If further processing is needed, such as machining or CNC cutting, we do it in the same workshop.

04

Delivery

Collect the finished attachment from our workshop in Osijek or we deliver it to your address. For larger series we arrange transport by agreement.

who uses our services

Industries we serve

Our welding services are used by professionals who work with heavy machinery and tools exposed to daily wear.

Construction companies

Excavator bucket repair, structural repairs, fabrication of new attachments.

Quarries and mining

Hardfacing of crusher liners, screens and wheel loader buckets exposed to constant abrasion.

Agriculture

Repair and reinforcement of ploughs, disc harrows, seed drills, tractor parts and farm machinery.

Municipal services

Repair of truck bodies, containers and special municipal vehicles.

Concrete plants and mixers

Hardfacing of drum, mixer and vibrating screen liners exposed to abrasive concrete mix.

Wood industry

Repair of mulcher and grab parts, tools for felling and timber handling.

Metalworking industry

Fabrication of steel structures, assemblies to drawing, prototypes and series production.

Plant hire companies

Quick fixes and repairs of hired excavators, backhoe loaders and rental machines.

frequently asked questions

FAQ — MIG/MAG welding

Can you repair a worn part, or do I have to scrap it?

In most cases, yes. Send us a photo or bring the attachment to our workshop and we will assess whether a repair is worthwhile. A repair is often much cheaper than buying new, especially if the problem is localised (e.g. just a worn cutting edge or a crack). A bucket repaired with new Hardox® cutting edges often lasts like a new one.

What is hardfacing with wear-resistant wires?

Hardfacing means applying a layer of extremely hard material to wear zones, e.g. bucket cutting edges or blade surfaces exposed to abrasion. It uses special hardfacing electrodes (wires) with a high carbide content that form a hardened layer on the surface. The result is 2-3 times longer service life of the part without replacing the base structure.

Do you also weld Hardox® steel?

Yes, it is our speciality. Hardox® steel requires controlled heat input, correct preheating and the right filler metal. Incorrect welding destroys the material's structure. As a certified Hardox® Wearparts Center we work to SSAB guidelines and guarantee joint strength.

What is the difference between MIG and MAG?

The difference is the shielding gas. MAG uses an active gas (CO₂ or an Ar/CO₂ mix) and is used for unalloyed structural steels; it is our primary process. MIG uses an inert gas (argon, helium) and is intended for non-ferrous metals such as aluminium. For steel parts and attachments, MAG is the technically and economically better choice.

Can I bring the tool in, or do you come on site?

We normally work in our workshop in Osijek, Vukovarska 221, where we have all the equipment, filler materials and the option of combining with other services (cutting, CNC machining). For large structures or regular customers we arrange on-site work as needed. Tell us what the job is and we will suggest the best approach.

How long does a repair or a new structure take?

Fast delivery. The lead time depends on the scope of work: smaller repairs (welding cracks, replacing cutting edges) can be finished very quickly if the attachment is with us. Larger structures and series take longer. We confirm the exact lead time with the quote.

Can you combine welding with other services?

Yes, all services are under one roof. If you need laser cutting (preparing parts before welding), CNC machining (finishing after welding) or a complete attachment repair, we do it in the same workshop. That means a shorter overall lead time, lower overall costs and a single point of contact for the whole project.