Direct pin-on mounting
The simplest and most reliable option: the bucket is pinned directly to the excavator arm. No additional mechanisms.
- The lowest-cost option
- Strongest connection, with no weak points
- Changing buckets takes longer
digging buckets · 1–10 t
Digging buckets for 1–10 tonne excavators, also with Hardox® In My Body certification. Widths 250–1000 mm, mounting made to fit your machine. In-house manufacturing in Osijek, Croatia.


hardox® in my body
For smaller excavators we also make buckets with Hardox® In My Body certification. SSAB's certification confirms that the wearing parts are made of genuine Hardox® steel:
The quote states which bucket comes in the Hardox® In My Body version. Max Metal is also a certified Hardox® Wearparts Center.
Hardox® Wearparts Center →widths
The most requested widths and their typical use. We also make intermediate sizes (350, 450, 700 mm) and custom widths.
Narrow trenches for water and gas lines, cable trenches.
Standard digging, smaller foundations, manholes for utility work.
Sewer trenches, medium-sized foundations, drainage trenches.
The all-round width for most construction work and loading, and our best-selling option.
Wider excavations, foundations for family houses, larger loading jobs.
The largest standard size for the 10 t class, for loading and excavating larger volumes.
Not sure which one you need? Tell us the model and weight of your excavator and the type of work, and we will suggest a width.
gallery · buckets from our production
Buckets for the 1–10 t class that we have made in Osijek, from narrow trenching buckets to wide loading buckets, with various mountings and tooth systems.
mountings
The most important thing when ordering a bucket is the mounting: how the bucket attaches to your excavator. Wrong mounting = the bucket does not fit. All we need is the make, model and weight of the excavator; if you have a quick coupler, tell us which system (Lehnhoff MS01/MS03, Verachtert, Martin, Volvo, S-type), as the designation is often stamped on the coupler itself. Not sure? Take a photo of the mounting and send it to us, and we will identify it from the picture.
The simplest and most reliable option: the bucket is pinned directly to the excavator arm. No additional mechanisms.
Mechanical or hydraulic quick couplers for changing attachments in seconds. We make buckets for all well-known systems:
Do you have an old or unusual excavator model with no standard coupler? We make a mounting adapted to your machine.
straight from our stock
We always keep in stock the best-selling digging bucket widths for the 1–10 t class (300, 400, 500, 600, 800 mm). Fast delivery, without waiting for production or third-party suppliers.
If you need a non-standard width or a specific mounting, we make it to fit your machine. Send us the model and weight of your machine and the width you need, and we will get back to you straight away with a quote and lead time.
check availability →selection guide
The right choice combines machine weight, type of work, width and mounting. Send us a few details and we will advise you free of charge.
Weight (1–3, 3–5, 5–8 or 8–10 t) and excavator model (Kubota KX, JCB 8, CAT 301…) determine the width range.
Narrow trenches for utilities 250–400 mm. Digging and foundations 500–600 mm. Loading and larger volumes 800–1000 mm.
Cutting edge only (ditch cleaning, grading) or cutting edge with teeth and adapters for standard digging, as you choose.
Pin-on, Lehnhoff MS01/MS03, Verachtert, Martin, Volvo S-type or custom: made to fit your machine.
why max metal
A manufacturer based in Osijek, Croatia. Manufacturing, mountings and servicing under one roof, without waiting on third-party suppliers.
Certified to work with Hardox® material: genuine material and correct processing and welding procedures.
The best-selling bucket widths are always in stock, ready for immediate delivery, without waiting for production.
We don't just sell and forget: we repair, hardface and replace wear parts. Your bucket lasts for years.
machine makes
Our digging buckets fit all makes and types of mini excavators in the 1–10 tonne class. We make the mounting to fit your machine.
Is your machine not on the list? No problem: we make custom mountings for all excavator models, even older or lesser-known brands.
technical details
Open only what interests you.
A digging bucket (also known as a general-purpose bucket or trenching bucket) is the most common excavator attachment. It is used for digging trenches, foundations and manholes and for loading material on excavators of all classes, from 1–3 tonne mini excavators to mid-size machines up to 10 tonnes.
At Max Metal we make digging buckets for the 1–10 t class with Hardox® cutting edges, with or without teeth, and for smaller excavators also with Hardox® In My Body certification. The standard width range is 250 to 1000 mm (the most requested are 300, 400, 500, 600 and 800 mm), but we also make custom widths to suit the customer's needs.
All our buckets are manufactured in-house in Osijek. As a certified Hardox® Wearparts Center we use genuine material and work to SSAB standards, which means longer service life, less wear and better resistance to cracking in demanding conditions.
We make the wearing parts of the bucket from Hardox® steel, the world's best-known standard for tools exposed to wear. The combination of hardness (from 425 HBW upwards) and toughness makes them resistant to both wear and cracking.
On buckets with Hardox® In My Body certification, the cutting edge, side plates, side cutters and reinforcements and the bucket bottom are made of Hardox.
We make the bucket cutting edge from Hardox® wear plate, usually Hardox® 450 or 500 depending on the application. The cutting edge is the main wear zone and the first part to wear out; a quality edge means years of work without intervention.
We fit teeth and adapters as required: either a complete set with adapters or just the cutting edge without teeth (as the customer prefers). We offer standard teeth for all compatible systems and can advise which system suits you.
We fit side cutters and reinforcements on request; they extend the bucket's service life in abrasive conditions (rock, gravel, construction waste).
frequently asked questions
It depends on the job. For narrow trenches (water, gas, cables) 250–400 mm. For standard digging and foundations 500–600 mm. For loading and larger jobs 800–1000 mm.
Customers who have only one bucket usually choose 600 mm because it is the all-rounder. Our advice is free: tell us the machine weight and the type of work, and we will suggest the best width.
We always keep in stock the best-selling widths (300, 400, 500, 600, 800 mm), and for the most common mountings delivery is fast.
If you need a non-standard width or a specific (custom) mounting, we confirm the lead time in the quote. Send us an enquiry with your machine model and the width you need, and we will let you know availability straight away.
The price depends on several factors: bucket width, mounting type, whether it has teeth, and whether it has side cutters and reinforcements.
We offer basic versions and versions with extra reinforcement. Send an enquiry with your machine weight and the width you want, and you will receive an exact quote the same or the next working day.
The easiest way is to take a photo of your current bucket or coupler and send it to us: we identify the system from the picture. The designation is often stamped on the coupler itself (e.g. "MS03", "CW10").
If we cannot identify the system, we can send you a measurement sketch that you simply fill in with a tape measure, and we take it from there.
That is an option. You can have just the cutting edge (mostly for work where teeth are unwanted, e.g. ditch cleaning) or the cutting edge plus fitted teeth with adapters (for standard digging). The price changes accordingly.
As standard we fit quality teeth and adapters, and we can advise which system is best for your type of work.
We make the cutting edge from Hardox® wear plate, usually Hardox® 450 or 500 depending on the application. On buckets with Hardox® In My Body certification, the side plates, side cutters and reinforcements and the bucket bottom are also made of Hardox.
As a certified Hardox® Wearparts Center we work with genuine SSAB material, which means the bucket keeps the wear properties Hardox® is known for (2–5× longer service life than ordinary structural steel).
It is SSAB's certification for products whose wearing parts are made of genuine Hardox® steel. On our buckets these are the cutting edge, side plates, side cutters and reinforcements and the bucket bottom.
The quote states which bucket comes in the Hardox® In My Body version. Max Metal is also a certified Hardox® Wearparts Center.
Yes. Alongside standard digging buckets we also make:
All in the same weight range (1–10 t and above).
Excavator model and weight, required width, type of work. Reply the same or the next working day.
See our digging buckets for 11–24 tonne excavators: widths 400–1600 mm, ST and HD versions.
buckets 11–24 t → all bucket types →